Multitool Belt & Disc Grinding Attachment 1221x100mm

PO8CW | Multitool Belt & Disc Grinding Attachment 1221x100mm Features The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing. • EFFICIENCY - Superior performance and a user friendly, toolless belt change in under 5 seconds. • VERSATILITY - Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between. • ACCURATE TRACKING - The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners. • QUALITY CONSTRUCTION - Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating. • 3 YEAR WARRANTY - Against faulty materials and workmanship, even when used commercially. Specifications • 48" x 2" (1220 x 50mm) belt • 7" (178mm) diameter disc • 8" (200mm) diameter rubber contact wheel • 5 1/2" (140mm) diameter drive wheel • Suits most 8" or 10" bench grinders with a screw mounted wheel guard and a minimum of 3/4 HP • Suits grinder shaft sizes of 5/8" and 1/2". A steel bush is supplied to adapt the drive wheel to 1/2" • Fitting Kit supplied • Suits most 8" or 10" bench grinders with a screw mounted wheel guard and a minimum of 3/4 HP • Suits grinder shaft sizes of 5/8" and 1/2". A steel bush is supplied to adapt the drive wheel to 1/2" • Fitting Kit supplied